autocad electrical attribute template symbol builder

This style contains just the wire connection attributes with no graphics.

Expand the Direction/Style list and select Top/None.Expand the Wire Connection section of the Symbol Builder Attribute Editor.In this exercise, wire connection attributes are inserted at the top and bottom of the symbol. When you add a wire connection, you select the style, the direction the wire connects from, and whether to include the optional TERMxx and TERMDESCxx attributes. You can define wire connection points for the library symbol. Select an insertion point for the attribute.It is the default code used as the %F value of the tag format (such as “CR”, “PB”, “LT”) The value is predefined as “CB” since the Circuit breaker template was selected. Change the height to 0.125 and Justify to Center.Select the Properties tool to launch the Insert/Edit Attributes dialog box.If the Symbol Builder Attribute Editor is not visible,Ĭlick Symbol Builder tab Edit panel Palette Visibility Toggle.The WDTYPE attribute value must have a value of “1-” for a one-line symbol or “1-1” for a one-line bus-tap symbol. The other attributes in the Required section are expected on a one-line parent symbol, however the symbol is recognized as a one-line parent symbol without them.

The TAG1 and WDTYPE attributes are the only required attributes for a one-line parent symbol. You are not limited to these attributes, and you can include your own user-defined attributes on the AutoCAD Electrical block files. I thought this was worth posting in the event that someone runs into a similar problem, as it appears that AutoCAD Electrical occasionally gets confused by the multi-monitor setup.In this part of the exercise, you insert some AutoCAD Electrical attributes from the Symbol Builder Attribute Editor. Suspecting it was due to something in my 2-monitor setup, here's what I did to fix the problem:ġ) Started AutoCAD Electrical - and it showed up on my (second) large monitor (where I normally do my AutoCAD work).Ģ) Dragged the AutoCAD Electrical application to my regular (smaller) computer monitor and maximized it to full screen.ģ) Started the Symbol Builder (AESYMBUILDER) and found the Attribute Editor showed up on the regular (smaller) monitor and the block editor palette showed up on the second larger monitor.Ĥ) I dragged the Block Editor to my main monitor (the smaller one) so that everything was displaying on my regular (smaller) monitor.ĥ) Finally, I dragged the AutoCAD Electrical application over to my larger second monitor and now all displays properly and works as I expect it to. This was puzzling, as I had used it without problem in the past. I ran into a somewhat similar problem where I tried using the symbol builder (AESYMBUILDER) and the attribute editor wasn't showing up as expected.

Autocad electrical attribute template symbol builder